Product | SEW HDPE PIPES

Product Type	Specifications
PVC 70°C	IS 694, IS 8130 Class 2(1.5&2.5 Sq.mm), for others class 5, IS 5831 Type A insulaton & ST-1 sheath.
HR 85°C	IS 694, IS 8130 Class 2(1.5&2.5 Sq.mm), for others class 5, IS 5831 Type C insulaton & ST-2 sheath

Kindly complete the part numbers for these cables by adding the suffix (in place of'y') for the cable type 1-PVC 70°C,3-PVC HR 85°C.

Nominal Cross Sectional Area (Sq.mm)	No of Strands / Max. strand dia.(mm)	Nom. Insulation Thickness (mm)	Nominal sheath Thickness (mm)	maximum Overall Dimension (W x H) (mm x mm)
0.5	16/0.2	0.6	0.9	0.6 x 4.9
0.75	24/0.2	0.6	0.9	10.5 x 5.2
1	32/0.2	0.6	0.9	11.0 x 5.4
1.5*	22/0.3	0.6	0.9	12.0 x 5.6
2.5*	36/0.3	0.7	1.0	13.0 x 6.2
4	56/0.30	0.8	1.0	15.3 x 7.1
6	84/0.30	0.8	1.1	19.2 x 8.4
10	140/0.30	1.0	1.4	24.2 x 10.4
16	126/0.40	1.0	1.4	29.0 x 12.4
25	196/0.40	1.2	2.0	36.5 x 15.7
35	276/0.40	1.2	2.0	40.5 x 17.2
50	396/0.40	1.4	2.2	46.5 x 19.3
70	360/0.50	1.4	2.2	52.0 x 21.0
95	480/0.50	1.6	2.4	61.0 x 24.5

Conductor configuraton offered for 1.5Sq.mm-22/0.3mm,2.5Sq.mm-36/0.3mm (max.) class 2as per IS 8130.

Nominal Cross Sectional Area of Conductor (mm²)	2 Core & 3 Core for Single Phase AC/DC		Nominal sheath Thickness (mm)
Nominal Cross Sectional Area of Conductor (mm²)	Max. Current Capacity (A)	Voltage Drop (mV/A/m)	Max. Current Capacity (A)	Voltage Drop (mV/A/m)
0.5	5	83	4	72
0.75	8	56	7	48
1	13	40	12	35
1.5*	17	27	16	23
2.5*	24	16	22	14
4	30	10	28	8.8
6	38	6.8	36	5.9
10	52	4	48	3.5
16	70	2.6	64	2.2
25	88	1.6	80	1.4
35	112	1.2	100	1.0
50	146	0.97	130	0.84
70	216	0.7	192	0.62
95	262	0.59	230	0.48

Note: Conductor class 2 as per IS 8130

Multiply the current carrying capacity of the cable by the factors given below for various ambient temperature.

Note: For DC resistance, refer technical information table.